Infinova V6822-T Series Скачать руководство пользователя страница 3

Страница: 3 / 61

Read this manual carefully before installation. This manual
should be saved for future use.

Important Safety Instructions and Warnings:

Electronic devices must be kept away from water, fire or high magnetic
radiation.

Clean with a dry cloth.

Provide adequate ventilation.

Unplug the power supply when the device is not to be used for an extended
period of time.

Only use components and parts recommended by manufacturer.

Position power source and related wires to assure to be kept away from
ground and entrance.

Refer to qualified personnel for all service matters.

Save product packaging to ensure availability of proper shipping containers
for future transportation.

Indicates that the un-insulated components within the product may carry

a voltage harmful to humans.

Indicates operations that should be conducted in strict compliance with

instructions and guidelines contained in this manual.

Warning: To avoid risk of fire and electric shock, keep the product away
from rain and moisture!

Содержание V6822-T Series






























































Результаты поиска

Содержание V6822-T Series

Отзывы:

Infinova V6822-T Series, Руководство пользователя, Страница: 3 / 61

Результаты поиска

Содержание V6822-T Series

Отзывы: