19
(2) And then determine the width and height with the up/
down/ left/ right action of the keyboard joystick. Move the joystick
up to increase height, down to decrease height, left to decrease
width and right to increase width.
(3) The setting mask area will be displayed in translucent color.
(4) After the height and width are set, enter 2+SHOT to save
the values and preset information.
(5) Exit menu, when you perform PTZ operation, the set mask
area will be linked with motor.
Note:
1. For 23X/35X PTZ cameras, when setting the width and height of
the privacy mask via SET MASK, there are no reference lines.
2. The two mask modes cannot be activated simultaneously. The
two modes are independent.
3. When setting privacy mask, the vertical tilt angle should not be
less than -70°.
4. The PTZ cameras will check if the privacy marks are enabled
during power-on and self-testing. The enabled privacy mask areas
would be displayed through preset running according to number
sequence from small to large.
DIRECTION DISP SET
Function:
Show real-time orientation of lens on monitor.
Options:
OFF – (Default) disable to show real-time orientation of
lens on monitor.
ON - Show real-time orientation of lens on monitor.
Operation:
Set “DIRECTION DISP” as “ON”.
Move the cursor down to “FIX THE NORTH” and then
deflect the joystick left or right to set the north.
Move the cursor down to “SAVE PARA”, if select
“YES”, which means to set the current lens orientation
as the north; then move the cursor to “RETURN” and
click it to save the current north setting. If it is no need
to save the setting, please select “NO”.
6.7 Home Position
After receiving no command for a certain period of time, the PTZ
camera can automatically return to a position that has been
previously defined ("home position"). This feature ensures that the
PTZ camera view a key area when not controlled by a user. It can be
set up in the HOME RETURN menu.
HOME POSITION
RETURN TIME
RETURN
: NONE
: 000min
SET CAMERA ID
CAMERA SETUP
SET AE MODE
OSD SETUP
AUTOPAN SET
PATTERN SET
AREA SET
DEFAULT SET
EXIT
HOME RETURN
CONTROL SET
SET TOUR
HOME POSITION
Function:
the home position parameters.
Options:
NONE -
disable the home position feature.
AUTOPAN 001 ~ 004:
choose one autopan as the PTZ
camera's home position.
PATTERN 001 ~ 004:
choose one pattern as the PTZ
camera's home position.
PRESET 001 ~ PRESET 254:
choose one of the 254
presets as the PTZ camera's home position.
Note:
Before selecting an operation as the home position, please
make sure that it has been properly set.
RETURN TIME
Function:
Determine how long before the inactive PTZ camera
returns to its home position.
Options:
001 ~ 010min (Step by 1)
set the return time (in
minutes).
010 min~ 001hour (Step by 10)
set the return time (in
minutes).
001 ~ 012hour (Step by 1)
set the return time (in
hours).
Example:
HOME POSITION
RETURN TIME:
RETURN
: PATTERN 001
030 min
SET TOUR:
The sample menu shown above indicates that when the camera has
not been used for 30 minutes, it will be automatically positioned at
PATTERN 001.
SET TOUR
Function:
Set different actions in serials.
Options:
6 tour could be set at the most and each tour could link
with 16 actions, which could be preset (up to 254 presets
selectable), pattern or autopan and the dwell time could
be set independently.