Use
r’s
Manual of OMNI Express Patient Monitor
- 27
037.007.0001 Rev.2
Figure 13: Window for ARR Retail Information
3.
Rename:
To rename a selected ARR item.
4.
Delete:
To delete a selected ARR item.
5.
Sort:
to sort the arrhythmia items by
Time
or
Type
. The factory setting is by Time.
Arrhythmia analysis can monitor 13 kinds of arrhythmias. Refer to below.
1. ASY
--- Asystole
2. VFIB/VTAC --- Ventricular Fibrillation/ Ventricular Tachycardia
3. PNP
--- Pacemaker Not Pace-making
4. PNC
--- Pacemaker Not Captured
5. VT>2 --- Ventricular Triplet
6. CPT
--- Ventricular Couplet
7. PVC
--- Ventricular Premature Beats
8. BGM
--- Bigeminy
9. TGM
--- Trigeminy
10. ROT
--- R ON T is detected.
11. TAC
--- Tachycardia
12. BRD
--- Bradycardia
13. MIS
--- Miss Beat
ERROR MESSAGES OF ECG MONITORING
Sometimes messages will display above the ECG waveform
：
Prompts
Explanation
Lead off
ECG leads fall off the skin or the monitor
ECG Signal Weak
Monitor system cannot calculate HR value
when the ECG Signal is too weak.
MAINTENANCE AND CLEANING
PATIENT CABLE AND LEAD
After every use, the cable must be cleaned following the methods below:
◼
Clean the paste off body and the remainder of electrolyte on the electrode. The
paste-eradicator can be used when removing the remains of the adhesive tape, but
acetone, alcohol, ammonia, chloroform and other strong solvents are not
recommended, because they could fatally damage the vinyl cable.
◼
Use a sponge moistened in mild soap liquid or other suitable detergent solution to
clean the cable and then dry them. Do not submerge the cable into the water.
◼
Check each cable to see whether they are corroded
,
damaged or degenerated. Do
not use a pressure cooker to disinfect the cable and electrode or heat them to
temperatures at or about 75
℃
(167F). If there is dirt on the surface of the material,
clean with an abluent that will not leave any residue. Do not use a metal grinding
medium like floss. The storing temperature should be between -20
℃
and 75
℃
(-68F
