FY operation manual
- 44 -
1. Printer idle for a short time
Set up Online Mode for Printer, in order to prevent print head clogged.
2. Printer idle for a day
After working day, leave print head at Clean Position, turn off Air Valve, and cover the print head with a
cap.
Caution: please put several pieces of cleanroom wiper into a cap to cover each print head, then
wrap all print heads by a big piece of the wiper. The wiper should be wet with a mount of
cleaning solution. You do not need change the wiper every day, but please keep it wet with
cleaning solution.
When you turn on printer next time, do the followings:
•
Take off a cap from print head
•
Turn on the Air Valve
•
Turn on Printer
•
Move print head to Clean Position
•
Press K1 on the MFAB, select F2, clean print head with low level ink and then you can start to
print.
3. Printer idle for a long time
If you do not use printer for a long time, for example, transport machine to another place, you need clean
up ink from print head and fill a few special material into print head(s).
