FY operation manual
- 17 -
5.2.4 Options
1.
Purge times
Set up number of lines, print head will clean with negative pressure automatically after reaching the
number. No purge applied if setting is “0”.
2.
Purge Quantity
Set up the amount of ink sprayed after cleaning print head. The ink amount also applied to the Purge
III when cleaning print head manually by M2
3.
Paper detect
Used to detect media border before printing. Option is 0 or 1. “
0”
stands for no paper detect. “
1
”
stands for paper detect automatically. This function has not implemented yet, set up “0” until further
notice.
4.
Fan velocity
Used to set suction for media. Range is 0 – 255, normally, setting is 128.
5.3 Printing Steps
Normally, you can operate by the followings:
1. Take off the print head cap.
2. Turn on air valve.
3. Insert media smoothly. Lower the clamp lever.
4. Turn on the power switch of printer.
5. Press F2 on MFAB, clean the heads and print test draw until there is no nozzle clogged.
6. Press
the
ONLINE
key to select an ONLINE mode. In the case ONLINE MODE display on the LCD
screen.
To switch between
online mode
and
offline mode
, press
ONLINE
key.
On offline mode, the LCD displays operation menu.
On online mode, the device will receive printing data from computer and execute output operation.
7. After processing the pattern you want to print out, copy the image to the control computer.
8. Use RIP software to print. See Chapter 10 for details.
MENU
M4
OFFINE
Purge Times
Purge Quantity
Paper Detect
Fan Velocity
ONLINE
MODE
Figure: Online Mode
MENU
OFFLINE
1. Moving System +
2. Clean Tools +
3. Adjustment +
4. Options +
Figure: Offline Mode
