FY operation manual
- 15 -
1.
X-Move
Press
ENTER
key,
Move
flashes on and off on the LCD screen. Press
/
key of the arrow keys can
cause media move back and forth. Press
ENTER
key to confirm when move to the right location.
Y-Move
Press
ENTER
key, number
XXXX
flashes on and off on the LCD screen. Press
/
key of the arrow
keys can cause print head move right-and-left. Press
ENTER
key to confirm operation.
2.
Media Detect
Press
ENTER
key, print heads move on Y direction back and forth once to check a media, and then it
stops at original position. If “
ERROR
” displays on the LCD screen, you probably have neither a media
nor detect sensor installed (It is not available when the manual published).
3.
Clean Position
Press
ENTER
key, number
XXXX
flashes on and off on the LCD screen. Press
/
key, print heads
move right-and-left. Commonly, set the clean position on left edge. Then press
ENTER
key to save the
information.
When you want to clean the print head and pump ink to ensure no nozzle-clogging, you can use this
function. After enters this function, number
XXXX
flashes on and off on the LCD screen. Press FUNC
key, print head will move to the defined cleaning position. Press
key, start to clean with negative
pressure automatically; Press key, start to purge once.
4.
Print Position
Press
ENTER
key, number
XXXX
flashes on and off on the LCD screen. Press
/
key, print heads
move right-and-left. Set up a value as a start printing position, press
ENTER
key to save the
information. When you print an image or print test drawing, they start at this position.
5.2.2 Clean Tools
1.
Clean All
Press
ENTER
key, print heads move to Clean Position and ink sprays automatically with negative
pressure.
2.
Purge
Ⅱ
Press
ENTER
key,
jet
flashes on and off on the LCD screen. Print head sprays ink automatically to
prevent the nozzles clogging. Flashing will automatically disappear after the completion of the operation.
Press the
ENTER
key again, and print head will spray ink again. In this mode, ink amount is medium.
3.
Purge
Ⅲ
Press
ENTER
key,
jet
flashes on and off on the LCD screen. Print head sprays ink automatically to
prevent the nozzles clogging. Flashing will automatically disappear after the completion of the operation.
Press
ENTER
key again, and print head will spray ink again. In this mode, ink amount is more than
Purge II.
Purge Quantity
from
Options
can set the ink amount.
MENU
M2
OFFINE
Clean All
Purge
Ⅱ
Purge
Ⅲ
