InfinitePlay ZK117, Инструкция по установке и эксплуатации

Страница: 2 / 19

KIT
KIT DESCRIPTION
KIT color video door phone system built on IP technology already
configured consisting of:
- 1 audio/video entrance panel, semi-surface wall-mounted with 1 or 2
capacitive touch push buttons, complete with 5Mpx color camera
- 1 power supply for DIN rail mounting (the space of 12 DIN modules)
-1 semi-surface wall-mounted monitor black (ZK117.40 / Z127.40) ,or
white (ZK117 / ZK127) with color screen TFT LCD 7" WVGA resolution
with Android operating system.
Z6001 DESCRIPTION
- Main power supply for INFINITEPLAY audio and video door entry
systems.
- Start-Up Time: 2 minutes to wait for Entrance Panel sound
-With internet service in the home, you can establish a connection
between power supply (P5) and router to see services such as weather,
news, directly from videophone.
TECHNICAL CHARACTERISTICS
- Supply Voltage: 100V - 240VAC, 50-60 Hz, 1,8A
- Operating temperature: 0
°
C to +45
°
C
- Polymer housing: ABS V0
- Size: 208x89x60 mm
- Relay Ratings: Max 30VDC - 2A. Non to be used with AC Voltages
- Inputs: Open Collector (Internal Pull-Up)
MORSETTI SERIGRAFIA DESCRIZIONE LIMITI
1 N AC NEUTRO 100-240VAC, 50-60Hz, 1,8Amps
2 - TERRA
3 L AC FASE 100-240VAC, 50-60Hz, 1,8Amps
4 IN1 INGRESSO 1 Ingresso Open Collector (Pull-Up Interno)
5 IN2 INGRESSO 2 Ingresso Open Collector (Pull-Up Interno)
6 IN3 INGRESSO 3 Ingresso Open Collector (Pull-Up Interno)
7 IN4 INGRESSO 4 Ingresso Open Collector (Pull-Up Interno)
8 GND GND per INGRESSI 1-2-3-4
9 GND GND per INGRESSI 1-2-3-4
10 AUX1 RELAY AUX1 (2A@30VDC) Max 30VDC - 2Amps
11 C1 COMUNE 1
12 AUX2 RELAY AUX2 (2A@30VDC) Max 30VDC - 2Amps
13 C2 COMUNE 2
14 AUX3 RELAY AUX3 (2A@30VDC) Max 30VDC - 2Amps
15 C3 COMUNE 3
16 S- COMUNE SERRATURA
17 S- COMUNE SERRATURA
18 S+ 12VDC 1A SERRATURA Uscita 12VDC @ 1Amp
19 USB PORTA USB 2.0 Uscita Max 500mA
20 RS232 PORTA RS-232 DIAGNOSTICA
21 POWER LED POWER
22 P1 LED LED POE PORTA 1
23 P2 LED LED POE PORTA 2
24 P3 LED LED POE PORTA 3
25 P4 LED LED POE PORTA 4
26 P5 LED LED POE PORTA 5
27 STATUS LED RBG STATO
28 -
PLUG PER MODULO
ESPANSIONE
29 P1 PORTA 1 10/100Mbps Uscita PoE IEEE 802.3af Max 12W
30 P2 PORTA 2 10/100Mbps Uscita PoE IEEE 802.3af Max 12W
31 P3 PORTA 3 10/100Mbps Uscita PoE IEEE 802.3af Max 12W
32 P4 PORTA 4 10/100Mbps Uscita PoE IEEE 802.3af Max 12W
33 P5 PORTA 5 10/100Mbps
2
EN
- Inputs: Open Collector (Internal Pull-Up)
- Lock Output: 12V @ 1A
- PoE Outputs: IEEE 802.3af Max 12W per port
MANDATORY INSTALLATION REQUIREMENTS ART. Z6001
- Equipment intended for installation in Restricted Access Location
performed by specialist technical staff only.
-The installation must comply with National Electrical Code (NEC)
(NFPA 70) and other country national elecrical codes.
- A readily accessible disconnect device shall be incorporated in the
building installation wiring.
- A readily accessible listed branch-circuit over current protective device
rated 15A must be incorporated in the building wiring for each power
input.
-Main power cables (terminal blocks 1-2-3) must be within 12 to 14
AWG.
- Interconnecting cables used must be UL certified and must be
compliant with the CEI 64/8 for video door entry systems:
- UTP CAT 5e for domestic routes dedicated to video door-phone
system
- FTP CAT 5e shared routes with tension cables
- UTP CAT 5e for outside with protective sheath in PVC
-All cables must be LSZH for Low Smoke Zero Halogen
-Mounting: this device can be mounted on DIN rail cabinets equipped
(12 DIN space modules)
- First to programming read the instructions carefully to get the full
picture on the features, functions and performance.