InfinitePlay ZK117, Инструкция по установке и эксплуатации

Страница: 6 / 19

KIT
7”
VIDEO DOOR PHONE INSTALLATION ART. Z7000 - Z7000.40
Installing from semi-surface mounted:
Install the monitor away from sources light and heat.
Install the flush-mounted back box type:
INFINITEPLAY ZT503
Vimar V71303 - V71318
ELVOX 6149
Bticino 503E (horizontal - vertical) – 506E
on the wall at a height of approximately 1.45 m from the floor to the
lower edge, as indicated in the figure.
Carry out the wiring according to the wiring diagrams.
Staying the video in the following way: put the monitor on the
attachment plate holding it slightly raised at this point by holding down
the front make a slight downward pressure
Remove the protective film from the display.
Should it be necessary to remove the video you need to lift (from
bottom to top) the video frame by pressing the hook.
Description connection terminal block:
2 - Line video with RJ45 connector
PW+ - Input for additional 12V power supply (if required)
PW- - Mass supplementary feeding
FP-Connection for door call button with reference to M
AL - General alarm apartment with reference to M
P - Panic button user with respect to M
M - Mass
6
EN
H= 145-150 cm
M - Mass
CH1 - Relay additional chime
CH2 – Relay additional chime
USB
Interconnecting cables used must be UL certified and must be
compliant with the CEI 64/8 for video door entry systems:
UTP CAT 5e for domestic routes dedicated to video door-phone system
FTP CAT 5e shared routes with tension cables
UTP CAT 5e for outside with protective sheath in PVC
All cables muste be LSZH for Low Smole Zero Halogen
Technical characteristics:
• Semi-surface mounted of ABS, glass parts are made from ultra-
strong, scratch-proof.
• Ready for installation by Semi-surface mounted with metal coupling
• LCD 7 "capacitive touch screen
• Video Signal WVGA 800X480 Cr 500
• PoE alimentation
• Standby power consumption 7 mA, in conversation: 150mA
• Operating Temperature: 0
°
to 40
°
C
• Electronic chime
• Input for door call.
• Size: 189x119x21 mm
Maintenance:
Clean the monitor using a soft cloth, which can be dry or slightly
dampened with water. Do not pour water directly onto the screen and
do not use any type of chemical product.