Infineon XMC Series, Инструкция по применению

Страница: 12 / 93

Introduction to Digital Power Conversion
XMC4000/1000 Family
Comparison of Power Conversion Methods
Application Guide 12 V1.0, 2015-01
2.3.2.3 ASIC controller versus MCU / DSP / DSC controllers
Here we outline some of the guiding properties to be considered, for the type of controller to choose
when selecting for High-end versus Low-end.
ASIC
ASIC controllers offer gate drivers and fixed optimized solutions at the lowest possible cost. They are
easy to use and they fit Low-end switch mode converters very well.
However, on the downside, they only handle known changes in load and input conditions during run-
time, and reusability is limited because they are a customized solution.
Positive properties:

Custom design for known conditions

Fixed and optimized settings

Lowest possible cost

Easy to use

Embedded gate drivers

Form factor
MCU / DSP / DSC
An MCU, DSP or DSC controller brings a platform approach, a smart system with high computation
capability, and embedded power conversion orientated peripherals.
Condition changes are handled in run-time, ensuring the highest efficiency and correct real-time
performance. These features mean that the MCU, DSP or DSC solution is particularly suited to High-
end power converters.
Positive properties:

Platform approach (Reuse, Extend)

When highest efficiency is required

Mixed power mode capability

Variable load / inputs

Programmable dwith software IP

Flexible communication