Infineon XC2000 Easy Kit, Руководство пользователя

Страница: 18 / 36

XC2000
Easy Kit
Information in Detail
XC2000 series Board Manual 18 V 0.2, 2008-11
3.2.3 LIN Interface (X109)
The board has a connector with 4 pins for LIN. For the pinout of the connector see Figure
8. The LIN transceiver is connected to USIC1 Channel 0 module of the CPU.
Figure 8 On-board header (X109)
3.2.4 OCDS Interface
The OCDS1 signals are connected to the IDC16 plug (X202). For pinout of the
connector see Figure 9. You can connect any debugger to this connector.
The signals /BRKIN and /BRKOUT are not connected per default. If you need this signals
in the connector then assemble R225 and R226 with a 0R resistor.
If you connect a debug hardware make sure that the MiniWiggler circuit is not activ
(ACTIV LED is off) and on the DAP connector (X204) is no hardware connected or the
hardware is tristated.
If the ACTIV LED is on, then stop the active DAS Server JTAG over USB Chip and/or
remove the USB connection to the PC.
1 2 3 4
GN
D
Vs
Bu
s
VB
at