Infineon iMOTION EVAL-M3-IM564 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 47

Infineon iMOTION EVAL-M3-IM564 Скачать руководство пользователя страница 19

User Manual

19 of 47

Revision 1.4

2020-07-16

EVAL-M3-IM564 User Manual

iMOTION

™

Modular Application Design Kit

Getting started with EVAL-M3-IM564

After the drive system parameter file has been programmed into the IMC102 controller, and the motor drive

system is powered, the MCEDesigner can be used to start/stop the motor, display motor current traces, change

the motor speeds, modify drive parameters and carry out many other functions. Please refer to the

MCEDesigner documentation for more details.

Note:

On-board debugger portion of EVAL-M3-102T is galvanically isolated from the controller portion

and the attached power board. In order to program the parameters or firmware to the IMC102T-

F064 controller, the 3.3 V DC voltage needs to be supplied to the controller portion of the EVAL-M3-

102T. This voltage can either be supplied by the power board (MADK power boards are designed to
supply the 3.3 V to the control board through M3 connector) or by feeding the 3.3 V DC voltage to

the control board through some of the available 3.3 V access/test points if the power board is not

attached to the EVAL-M3-102T control board.

To program new firmware and drive system parameters into IMC102T-F064, please click “Tools” menu and

select “Programmer” in the pull-down list. The pop-up window “Program IMC controller” will show up as in
Figure 9. Click on the “Program Firmware and Parameter” radio button, and select the Drive System Parameter

file created using MCEWizard by clicking on the “Browse” button on the row of “Program Parameter File,” and

then select the firmware file by clicking on the “Browse” button on the row of “Program Firmware File.” Finally,

click on the “Start” button to program the parameter file into the IMC102T-F064 IC.

Figure 9

Program firmware and parameter in “Program IMC Controller” pop-up window

All the latest firmware files for different types of iMOTION

TM

control ICs are available for download via the

Infineon iMOTION

TM

website (

http://www.infineon.com/imotion-software

).

«
...
17
18
19
20
21
...
»

Содержание iMOTION EVAL-M3-IM564
















































Отзывы:

Нет отзывов