11
Determine whether your infant/child requires the additional padding provided with this
restraint, to ensure a safe and snug fit in the restraint. Refer to page 6 for suggested padding
combinations.
Converting to Infant Seat
To ensure baby’s back is evenly supported, do not put more than one nappy on the
baby and make sure the nappy is not thickly folded at the back.
WARNING
!
Selection of Appropriate Padding Combinations
Set Up
Infant Seat
Recline Section (Swung Forward)
& child restraint fully reclined.
- Refer to the shoulder height labels (As shown
on pages 9).
- For correct shoulder strap slot height refer to
page 13.
IMPORTANT
!
At the front of the restraint is a red lever. Pull red lever
forward and recline the seat base as far as possible.
Ensure the recline section is swung forward (see
Figure 1).
Ensure the In-built harness “Shoulder straps” are
positioned in the appropriate slots.
Reclined Position
Figure 1
REAR
FRONT
RECLINE
SECTION
RED
LEVER
Front of Car
1
2
