41
Installing Using Vehicle Seatbelt
Installation
Child Car Seat
Adjusting Recline Angle
SAFE GRIP
BELT CLAMP
The
Safe Grip
(red belt clamp)
locks the lap
belt
slack in the lap belt.
To install the
Safe Grip
(red belt clamp), open it
and clamp the “sash section” ONLY of the
vehicle seat belt by closing the barrel section of
the red belt clamp in the direction of arrow 1 in
Figure 5 and then locking with the toggle
section by pushing in the direction of arrow 2 in
Figure 5 when the
Safe Grip
(red belt clamp) is
secured in place, the lap section is now tightly
holding your child restraint in place, independ-
ent of the sash section. The
Safe Grip
(red belt
clamp) must be removed when the child
restraint is not installed to allow other users to
use the seat belt as a lap/sash seat belt. Always
keep the
Safe Grip
(red belt clamp) in pocket
provided when not in use.
NOTE: To adjust the recline angle of the child seat
refer to “Converting to Child Seat” on page 32 & 45.
Figure 6
Safe Grip
(red belt
clamp)
TOGGLE
SECTION (2)
LAP SECTION
BARREL SECTION (1)
SAFE GRIP (B)
(red belt clamp)
ATTACH TO
SASH SECTION
ONLY
SASH SECTION
BUCKLE (A)
(AND TONGUE)
Figure 5
NOTE:
Do not place the
Safe Grip
(red belt clamp)
around both the lap and sash sections of the belt. This
could cause the
Safe Grip
(red belt clamp) to break.
