Industrial Shields PLC 10, Руководство пользователя

Страница: 24 / 37

Ref. 013001000100 Rev.1: 18-01-2021
23
Warning!
- Outputs: if the pin is working as output, its jumper of Zone 3 must be
connected as the 3.3 – 24 V option.
- Inputs: if the pin is working as input, DO NOT connect the jumper if you are
using a power supply voltage of 230V as it will damage the device and could
burn it.
This jumper zone makes the choosing between a 5V and 24 V. The 24V
option will be used in the case of using the pins as
OUTPUT as it will
provides the same voltage as the input voltage of the PLC, while the 5V
option will be reserved for the case of working as an
INPUT . Set the
jumper on the 1st and 2nd position for the 5 V choice or hte 2nd and
3rd pin for the 24V option. See an example on the section 8.2.
JUMPER ZONE 4
5 V 24 V
1 2 3 1 2 3