background image

 3 

industrialaircontractor.com

 

 

Please contact 1-888-895-4549 for further assistance.

Safety Information (continued)

PERSONAL SAFETY

 

Keep proper footing and balance at all times. 
Proper footing and balance enables better control 
of the tool in unexpected situations

 

Do not use on a ladder or unstable support.

WARNING

:

 Operating any power tool can result in foreign 

objects being thrown into your eyes, which can result in 
severe eye damage. Before beginning operation, always 
wear safety goggles, safety glasses with side shields, or 
a full face shield when needed. Always use eye protection 
marked to comply with ANSI Z87.1.  

WARNING

:

 This product contains chemicals known to 

the State of California to cause cancer and birth defects or 
other reproductive harm. Wash hands after handling. 

WARNING

:

 Use safety equipment. Always wear eye 

protection with side shields when operating power tools. 
A dusk mask, non-skid safety shoes, hard hat, or hearing 
protection must be used for appropriate conditions.

WARNING

:

 Stay alert when operating a power tool. Do 

not use the tool while tired or under the influence of drugs, 
alcohol, or medication.

WARNING

:

 Do not wear loose clothing or jewelry. 

Contain long hair. Keep your hair, clothing, and gloves away 
from moving parts. Loose clothes, jewelry, or long hair can 
be caught in moving parts.

WARNING

:

 Never touch any exposed metal parts on 

compressor during or immediately after operation. The 
compressor will remain hot for several minutes after 
operation. Do not reach around protective shrouds or 
attempt maintenance until the unit has been allowed to 
cool.

MOVING THE AIR COMPRESSOR

 

Grasp the handle.

 

When the location is reached, slowly lower the 
compressor to the ground. Always store the 
compressor in a horizontal position resting on the 
rubber bumpers.

 

When transporting the compressor in a vehicle, 
trailer, etc., make sure the tank is drained and  the 
unit is secured with straps to prevent tipping. Use 
care when driving to prevent tipping the unit over in 
the vehicle. Damage can occur to the compressor 
or surrounding items if the compressor is tipped. 
Do not lift by the shroud.

WARNING

:

 Risk of unsafe operation. Ensure proper 

footing and use caution when carrying the compressor so 
that the unit does not cause loss of balance.

Содержание C042I


























Отзывы: