Indramat TDA 1, Руководство по планированию проекта

Страница: 25 / 50

25 • DOK-DIAX01-TDA********-PRJ1-EN-E1,44 • 07.97
Type code: TDA 1- • • • - • -
Standard Designation Connections Index
interface terminals code
Interface Control inputs, X2, 37-pin IKS 610
to NC signal and
analogue outputs
Interface Motor feedback X3, 15-pin IKS 315
for feedback connection
2. Control cabinet design
Type code: TDA 1- • • • - • - • • •
see Doc.
"Elec. connections of
main spindle drives"
Fig. 14. Assignment by index code of standard interfaces to connection diagram
Fig. 15: Assignment by index code of controller function options to the electrical
connections on the unit and to connection diagrams
Function options
Additional
encoder input
(type code
field 7)
X5
15-
pin
~
Function
Coding
Designation Connection Index
options terminals code
A analogue X4, 9-pin IKS 613
D digital X4, 25-pin IKS 612
16 bit parallel
L SERCOS interface X4, light-wave conductor IKO
without
O additional
encoder input
for high-resolution
INDRAMAT
encoder ( ) IKS 312
P with
additional
Y encoder input for incremental IKS 327
encoder ( )
... and
synchronisation X5a, 15-pin ( ) master spindle
input feedback
O none
D digital X6, 25-pin IKS 614
position
command value
I incremental encoder X6, 15-pin IKS 620
output
serial
S interface X6, 25-pin IKS 015
RS 232 C
Additional
interface
(type code
field 8)
Circuit diagram
see Doc.
"Elec. connections of
main spindle drives"
Speed
command
value input
(type code
field 6)