13
STEP 3
Remove the L shaped knob from the front
of the base and connect the sensor wire
from the base to the handlebar post. Make
sure the pins are aligned and you hear a
click.
Slot the post into the base and secure
using the knob at your desired height.
STEP 4
Remove all the bolts and washers from the
computer post and slot on top of the
handlebar post.
To secure use one flat washer and the knob,
making sure the holes align.
Add the handlebars on top again aligning
the holes and securing using the bolts and
washers previously removed.
STEP 5
Secure the Ipad holder to the top of the
computer post using the bolts and washers
already found in the Ipad holder.
