16
Use the following instructions to test the resistance and correct operation of the bike.
1. Without anyone on the bike, turn the resistance dial both clockwise and
anti-clockwise and check to see if the magnets moves closer or further away from
the flywheel.
2. Now sit on the bike and begin to pedal, again turn the resistance dial in both
directions and check to feel the difficulty of pedalling changing.
3. Whilst pedalling press down the resistance dial to check the emergency stop
function.
4. Whilst pedalling on the bike make sure there are no noise issues or wobbling
coming from the bike.
TESTING THE BIKE OPERATION
TRANSPORTING THE BIKE
LEVELLING THE BIKE
If you are exercising on an uneven surface
use the rubber feet under the
stabilizers to adjust the height of the bike.
Once all four rubber feet are secure on the
ground with no wobble from the bike
tighten the silver nuts up to the stabilizer to
secure in place.
To transport your machine, stand in front
of the handlebars and pull down until the
wheels touch the ground. Roll the machine
to your desired location.
