IndigoVision Compact NVR-AS 4000, Руководство пользователя

Страница: 28 / 38

28 User Guide - v14
Before enabling the IP Access Restrictions, please make sure that a management PC is
included in the Addresses Allowed list. Failure to do so may result in a loss of connectivity,
and require physical access to the unit to disable the restrictions.
► For more information, see "Reset network security — Enter Y to reset all passwords used
to access device, disable IP Access Restrictions, and reset the device to HTTP use only
by deleting any HTTPS certificate or certificate request." on page 14
.
• Addresses Allowed — Enter the IP addresses of cameras that will be used for
recording, and Control Center PCs that will be used to administer and play back video
from this NVR-AS.
To remove an address, select the address and click Remove . Shift-click or Control-
click to select more than one address.
• Add Address — Enter an IP address and click Add .
You can also enter an address range, for example
10.5.1.12-20
, or a CIDR
address including a netmask, for example
192.168.123.0/24
.
Remote Secure Shell Access
Use these settings to control remote access to the unit using a secure shell (SSH). It is
possible to create a separate account with a different password to the unit for diagnostic
purposes. This support account has more restricted and secure access to the unit.
Enable - Use this to enable or disable remote access to the unit.
Support User - Use this to enable or disable a remote access account with the user name
"support". If enabled, remote access users will be able to login using this user name.
Support Password - Enter a password for the "support" user account. This must contain
between 8 and 32 printable ASCII (7-bit US-ASCII) characters. Enter the password again to
confirm it.
Passwords are automatically verified for security strength, and a warning will be provided if
the submitted password is not believed to be secure or could be improved.
Root Access - Use this option to enable or disable full administrative direct remote access to
the unit with the user name "root".
For best security it is recommended to ensure that remote access is disabled after unit
configuration. If remote access is required for diagnostic purposes it is recommended to
enable a support user account with a different password to the device password and disable
root access.
HTTPS Configuration
Use these settings to configure the HTTPS settings.
You can only install Signed Certificates when HTTPS is disabled.
Disable HTTPS before changing these settings.
• Mode
6 Configuration Compact NVR-AS 4000