IndigoVision Compact NVR-AS 4000, Руководство пользователя

Страница: 13 / 38

User Guide - v14 13
Continuously holding the button causes the NVR to shut down instantly, and can cause data
loss.
After the power button LED has turned red, the mains power can be disconnected.
Removing the mains power while the power button LED is green can result in data loss.
Remote power on
To remotely power on the Compact NVR-AS 4000, momentarily apply a short circuit across
pins 1 and 2 of PS_ON.
► For more information, see "Power" on page 10
Remote power off
To remotely power off the Compact NVR-AS 4000, momentarily apply a short circuit across
pins 1 and 2 of PS_ON.
► For more information, see "Power" on page 10
Initial configuration
Initial configuration can be done using one of the following methods:
• DHCP (default method)
• Monitor and keyboard connected directly to the device
• Serial connection
After initial configuration is complete, further device configuration and setup is completed
using the Web Configuration pages.
When using the Web Configuration pages for the first time you will be prompted to set a
password for the device. The password must contain between 8 and 32 printable ASCII (7-bit
US-ASCII) characters. Enter the password again to confirm it.
A warning message may be produced if the password is thought to be weak or insecure. After
you have logged in with this password you will be able to set a different or stronger password
at any point.
The web access password must be configured before the NVR is capable of performing any
authenticated network services, including recording.
► For more information, see "Configuration" on page 23
Compact NVR-AS 4000 3 Getting Started