14
User Guide - v14
DHCP
If your network supports DHCP connections, attach the device to the network and a valid IP
address is automatically assigned. The Compact NVR-AS 4000 can then be discovered
using the Control Center front-end application.
If your network does not support DHCP, the device will not be assigned an IP address and
you must follow either the monitor and keyboard or serial port instructions.
Using a monitor and keyboard
The Compact NVR-AS 4000 device can be configured by connecting a monitor to the VGA or
HDMI port and a keyboard to one of the USB ports.
1. Connect the keyboard and monitor to the device and press
Enter
.
You should see the following prompt:
IndigoVision Compact NVR-AS 4000 [standaloneNVR]
login:
2. Log in to the device using the username
config
and password
config
.
The device prompts you to enter the new configuration values.
3. At each prompt, press
Enter
to accept the current value.
•
DHCP
- Enter
Y
or
N
to chose between a DHCP or static IP configuration.
•
IP Address
— Enter the IP address for the unit's network connection.
•
Subnet Mask
— Enter the IP network subnet mask for the unit's network
connection.
•
Gateway
— Appropriate default gateway for remote network access: this is only
required if the unit is to communicate with devices on a different subnet.
•
Preferred/Alternate Name Server Address
— Enter the IP address of the DNS
server used to convert network names into numerical IP addresses. You only need
to enter a name servers if you wish to specify NTP or SMTP server addresses as
names and not as IP addresses.
•
NVR name
— Enter a name to describe the unit.
•
NVR location
— Enter a name to describe the location of the unit.
•
Reset network security
— Enter
Y
to reset all passwords used to access device,
disable IP Access Restrictions, and reset the device to HTTP use only by deleting
any HTTPS certificate or certificate request.
You are now ready to attach the device to the network.
The VGA and HDMI ports go into sleep mode after a period of inactivity. To bring back out of
sleep mode, press any key.
Using the Serial port
To configure the Compact NVR-AS 4000 using the serial port, you require an RS-232 Null
Modem serial cable.
1. Connect the serial cable between the device (COM 1) and the PC.
2. On the PC, use a Terminal Emulation program such as Windows HyperTerminal, and
set the serial port parameters as follows:
•
115200 baud
•
8 bits
3 Getting Started
Compact NVR-AS 4000
Содержание Compact NVR-AS 4000
