IndigoVision 10-Channel Rack, Руководство по оборудованию

Страница: 18 / 38

18
You are now ready to attach the 10-Channel Rack.
Step 4: Attaching a Video Source and Connecting Alarms
and Audio
Transmitter Cards
1. Connect a video source to the Video In BNC connector on the
back plane ( Figure 4 on page 18).
Video Loop Out
BNC Connector
PTZ & Alarm
Connector
Audio
Connector
Slot 1 Console Port
Slot 1
Power
Connectors
Video In BNC
Connector
Figure 4 Backplane view of 10-Channel Rack (transmitter)
Notice
Video Loop Out is a buffered version of the analog video input connected
to the Video In BNC connector.
2. If the system is not fully populated, verify that the video source
is connected to a slot which has a transmitter card inserted.
3. Connect alarms and audio if using these features. See
"Connector Pinouts" on page 27 for wiring information.
Receiver Cards
Connect alarms and audio if using these features. See "Connector
Pinouts" on page 27 for wiring information.