IndigoVision 10-Channel Rack, Руководство по оборудованию

Страница: 15 / 38

15
For information on changing your PC network settings, see "Network
Configuration" on page 13
To change these values:
1. Open the Internet Explorer application.
2. Select File > Open and enter the IP address of the card to be
configured (
10.5.1.11
,
10.5.1.12
,
10.5.1.13
, etc.), then
click OK .
The Configuration Home page opens.
3. Click the Network link on the left of the page.
4. The fields are as follows:
• Use DHCP — Select to assign the following network
parameters via a DHCP Server:
• IP Address
• Subnet Mask
• Default Gateway
• Hostname
• Network Time Server Address
Notice
IndigoVision recommends that if you are using DHCP, you should
configure the DHCP server to assign a given IP address based on the
unit’s MAC address. Also, if the unit does not receive any response from
the DHCP server it will default to using the network parameters supplied
by the last completed DHCP request.
If you are not using DHCP, you must enter the information
manually.
• Host Name — Enter a name for the camera to identify the
camera.
• Location — Enter a location to identify the camera.
• IP Address — Enter the IP address of the camera.
• Subnet Mask — Enter the IP network subnet mask.