Indian Motorcycle Scout Скачать руководство пользователя

Страница: 111 / 134

109

Cleaning and Storage

Rodents

Mice and other rodents are often the worst enemy of a stored

motorcycle. If the motorcycle will be stored in an area where

mice are a concern (particularly in rural areas, barns, sheds,

etc.) be sure to take extra measures to deter their

infestation. This may include placing a screen mesh over

any intake or exhaust openings (just be sure to remember to

remove them when you take the motorcycle from storage).

Park and Cover the Motorcycle

1. Park the motorcycle in its storage location. Block the

frame to take some of the weight off the front and rear

wheels.

Tip: Starting the motorcycle periodically during storage is NOT

recommended. Water vapor is a by-product of the combustion

process, and corrosion may result unless the engine is operated

long enough to bring the oil and exhaust system to normal

operating temperature.

2. Secure a plastic bag over the (cooled) exhaust outlets to

prevent moisture from entering the exhaust system.

3. Cover the motorcycle with a cover made from a durable,

breathable material designed for storage. Covering the

motorcycle helps protect it from dust and other airborne

materials. The cover must be of a breathable material to

prevent moisture from building up on the motorcycle

which can cause oxidation of metal surfaces.

Removal From Storage

1. Install a fully charged battery.
2. Check the oil level. If the motorcycle was stored in an

area subject to wide swings in temperature and

humidity (such as outdoors), change the engine oil

before starting the engine.

NOTICE: During storage, temperature and humidity changes can

cause condensation to form in the crankcase and mix with

engine oil. Running the engine with oil that contains

condensation can cause engine damage.

3. Inspect the storage area for signs of fluid leaks. Identify

and perform service to any leaking components.

4. Remove any intake or exhaust mesh covers installed for

rodent protection.

5. Make sure the fuel tank is at least 3/4 full.
6. Perform the pre-ride inspections. See page 38.
7. Perform a road test. See page 94.
8. Wash and polish the motorcycle. Wax, polish or apply

protectant to appropriate components.

Содержание Scout







































































































































Результаты поиска

Содержание Scout

Отзывы:

Похожие инструкции для Scout

Бренды по названию

Популярные бренды

Indian Motorcycle Scout, Руководство пользователя для мотоциклиста

Результаты поиска

Содержание Scout

Отзывы:

Похожие инструкции для Scout

Бренды по названию

Популярные бренды