Indian Motorcycle Scout, Руководство пользователя для мотоциклиста

Страница: 49 / 134

47
Operation
The operation section of this manual describes how to
ensure maximum performance and longevity through the
proper care and operation of your motorcycle.
Important areas covered by the operation section include:
Tip: Even if you're an experienced motorcycle operator or
passenger, read all of the safety information in this manual
before operating the motorcycle.
Engine Break-In
The engine break-in period for your motorcycle is the first
500 miles (800 km) of operation. During this break-in
period, critical engine parts require special wear-in
procedures so they seat and mate properly. Read,
understand and follow all break-in procedures to ensure the
long-term performance and durability of your engine.
NOTICE: Failure to properly follow the engine break-in procedures
outlined in this manual can result in serious damage to the
engine. Follow all break-in procedures carefully. Avoid full
throttle operation and other conditions that may place an
excessive load on the engine during the break-in period.
The more cautiously you treat your motorcycle during the
break-in period, the more satisfied you will be with its
performance later on. Overloading the engine at low RPM
and/or running the engine prematurely at high RPM may
result in damage to the pistons and/or other engine
components.
Observe the following precautions during the break-in
period:
• Upon initial start-up, do not allow the engine to idle for
long periods as overheating can occur.
• Avoid fast starts with wide open throttle. Drive slowly until
the engine warms up.
• Avoid running the engine at extremely low RPM in higher
gears (lugging the engine).
• Drive within the recommended operating speeds and
gears. See page 48.
• Engine Break-In • Accelerating
• Fueling • Braking
• Starting the Engine • Stopping the Engine
• Shifting Gears • Parking