Indian Motorcycle 2003 Chief Vintage, Руководство по обслуживанию

Страница: 72 / 305

*/%*"/$)*&'7*/5"(&4&37*$&."/6"- 8)&&-4"/%5*3&4
63
As the tire heats up, air inside the tire expands, raising
the tire pressure. Typically, this rise is on the order of
two to six psi with the bike fully loaded and traveling at
high speeds on a 90-degree day.
Tire inflation pressure recommendations for the Indian
Chief Vintage are:
• Maxxis whitewall MT90 16F 74H TL Front
Pressure with single rider — 32 psi (2.25 kgf/cm2)
Pressure at GVWR — 36 psi (2.53 kgf/cm2)
• Maxxis whitewall MT90 16F 74H TL Rear
Pressure with single rider — 36 psi (2.53 kgf/cm2)
Pressure at GVWR — 36 psi (2.53 kgf/cm2)
Tire pressures should be checked when the tires are
COLD.
Again, hot tires will show a pressure increase. DO NOT
let air out of a hot tire to bring it down to the cold
pressure setting. Releasing air will allow the tire to heat
even further and possibly lead to failure.
5JSF*OTQFDUJPO
Visually inspect the tire for any cuts, cracks and bubbles
on the tread surface and sidewall. Replace the tire if any
such damage is found or the tread shows excessive or
irregular wear.
5JSFBOE5VCF3FQMBDFNFOU
A rim strip, inner tube and tube-type tires are required
on wire-spoke (laced) wheels.
5PPMTSFRVJSFE
Tire irons
Rim protectors
Valve core remover/installer
Tire gauge
Figure 99 — Tire and tube