Removing product from crane tip and rotator
1. Place the rotator on a flat surface.
2. Tie a rope or similar around the product and fix it up on the machine's point, or other high
location, so that the product cannot fall when the crane tip is loosened.
At swing damper
• Dismantle the lower brake kit's adjustment device.
• Dismantle the lower brake kit's centering device.
• Remove the lower brake kit.
3. Remove the lower distance rings and the lower locking rings.
Caution
A
Risk of crushing injuries. Check that the product cannot fall before it is
loosened from the crane tip.
4. Remove the upper pins so that the product is loosened from the crane tip.
5. Remove the lower pins so that the product is loosened from the rotator.
6. Remove the product.
20
© Indexator AB
1102 086
2018-09-12 15:16
