Adjustment device
The adjustment device consists of adjustment screws with cup springs and
is fitted through the centering device.
Changing the torque of the adjustment screw causes greater or lesser compression to the
cup springs. The pressure on the braking device is changed, which then provides altered
braking power.
Installation
Assembly
For installation of BC, see manual 5002927.
Assemble the link with the rotator
1. Lubricate the pins (x 2) externally with
sufficient grease.
2. Fit pins with locating flat found on pin
aligned with locating flat situated on
rotator ear.
DANGER
A
Risk of personal injury. If the
locking rings are incorrectly
fitted, the pins can become
loose and the entire head can
become detached.
3. Fit the locking rings (x 2) on the pins,
from the inside the link. Check that the
locking rings sit firmly in the groove on
the pins.
Warning
A
If the distance rings cannot
be fitted, the locking rings are
positioned incorrectly.
4. Secure the locking rings with the distance
rings (x 2). Turn the groove towards the
centre of the link.
Image 5 Assemble the link with the rotator
1.
Pin
2.
Locking ring
3.
Distance ring
4.
Locating flat
5.
Rotator
1102 086
2018-09-12 15:16
© Indexator AB
11
