![Indexa DF-200 Скачать руководство пользователя страница 22](http://html.mh-extra.com/html/indexa/df-200/df-200_operating-instructions-manual_2053741022.webp)
5. Technical data
Operating Voltage
5 V
DC (mains adapter)
5 V
DC (mains adapter)
Current consumption
650 mA
300 mA
Ratio-frequency
2400 -2483 MHz
Modulation
GFSK
GFSK
Channels
4
4
Light sensitivity
8-20 Lux (w/o IR-LEDs)
Video output
1 Vp-p / 75 Ohm
Audio output mono
1 Vp-p / 600 Ohm
Audio/Video output
3,5mm Stereo socket
cinch
Resolution (Pixel)
640 x 480 (VGA) / 320 x 240 (QVGA)
Microphone
mono
Picture
colour (b/w with IR)
colour (b/w with IR)
Radio range (max.)
100 - 200 m (open space)
100 - 200 m (open space)
Operating temperature
- 10° C to + 50° C
- 10° C to + 50° C
Protection class
IP 44
IP 20
Dimensions without antenna (mm)
176 x 64 x 42
79 x 25 x 82
Operating Voltage
230 V ~ 50 Hz
230 V ~ 50 Hz
5 V
A
5 V
A
®
Mains Adapter
Output
, 1,0
, 1,0
Camera DF-200K
Receiver DF-200E
!
!
!
!
!
!
!
!
If you use the device for monitoring babies or small children ensure that
the camera and cable are out of reach of children. Otherwise there is a
risk to life and limb!
Do not pull the cables over sharp edges and do not crush or crimp them
elsewhere. Otherwise there are dangers of fire, personal and fatal injury.
Prevent the device from coming into contact with moisture and do not
submerge in water. Otherwise there is a danger of fatal injury.
Only operate the device from the supplied power supply. Before
connecting the power supply to the mains, ensure that the mains current
complies with 230 V ~, 50 Hz and is fitted with a fuse according to
regulations. Otherwise there are dangers of fire and fatal injury.
Protect the equipment and the cables against strong magnetic or
electrical fields and against strong mechanical loads and vibrations.
Do not place the equipment near fire, heat or in areas of high
temperature.
Only use the equipment with the supplied original parts or original
accessories.
Do not connect any damaged device (e.g. damage in transit). Repairs to
the equipment must only be performed by specialists.
Attention! Non-observance of these instructions puts
property at risk of damage.
6. Safety instructions
The following instructions are provided for your safety and satisfaction during
operation of the device. Note that non-observance of these safety instructions
results in significant risks of accident.
If this point is not heeded life and health is endangered.
Non-observance of these instructions puts property at
risk of damage.
Optimum results will be achieved by observing these
instructions.
Do not leave small children unsupervised with the device, packaging
material or small parts. Otherwise there is a risk of fatal injury due to
choking or suffocation.
Do not damage any gas, electricity, water or telecommunication lines
during drilling and fixing work. Otherwise there are dangers of fire,
personal and fatal injury.
Treat the cables carefully. Lay these so that they cannot be damaged and
do not present any tripping hazard. Otherwise there are dangers of fire,
personal and fatal injury.
Explanation of symbols and terms used:
Danger!
Attention!
Tip!
Danger!
!
!
!
31
“Zoom”-button
32
Channel selection button
33
Connection-loss LED
34
“Pairing”-LED
35
Power-LED
36
Stand
37
Mains adapter
38
3 dB radial antenna
Page 22
22 - GB