System1000_GB_130705.doc
Page
9
13. System Operation
Action Command
Confirmation
To arm
Keyfob: Press the ON button
Siren bleeps once, LED flashes
once. Further bleep after 10
seconds.
Panic alarm
Keyfob: Hold down the ON or
OFF button for 3 seconds
Siren sounds for 15 seconds
To disarm
Keyfob: Press the OFF button
Siren bleeps twice (1), LED
flashes once
(1) If the siren bleeps five times when disarmed, this is to warn you that an alarm has been triggered
during your absence.
Siren Tones
Tone Meaning
One bleep
Armed
Two bleeps
Disarmed
Two loud bleeps
House code accepted
Five bleeps
Disarmed, siren has been triggered
Full siren
Siren sounds for 2 minutes (for 15 seconds in the
case of tampering), and then resets
automatically.
14. Anti-Jamming
The System is fitted with an anti-jamming circuit. If it receives an unwanted radio signal for more than 30
seconds, it will trigger the siren for 15 seconds and then revert back to the previous status. The anti-
jamming circuit is factory set in disable mode. If you wish to enable the anti-jamming circuit, cover both
pins of LINK 1 (factory set, the link covers only one pin). If the anti-jamming circuit often triggers an
alarm, you probably live in an area with strong radio interferences. In this case you should disable the
anti-jamming circuit by removing LINK 1 and replace it by covering only one pin.
fig. 18