Index ABC 2 Series Скачать руководство пользователя

Страница: 13 / 118

A010

- Check the work area door and window pane

Orientation

Inspection and maintenance of the work area door includes several steps:

- Inspection of the window pane for damage.

- Checking the safety label on the window pane (replacement interval 8 years).

- Checking/adjusting or replacing, if necessary, the wipers.

- Check the work area door for smooth opening/closing.

- Automatic work area door (optional). Hydraulic valves and motor, control panel,

rack and spur gear. (for hydraulic door drive)

- Automatic work area door (optional – electric door drive – follow the

manufacturer’s documentation).

The window pane consists of three panes. The inner pane made of tempered glass,

the central pane made of polycarbonate, and the outer pane also made of

polycarbonate. The inner pane is relatively resistant. It can be cleaned with any

commercially available cleaning agents. Only the center pane is essential for the

impact resistance of the window pane.

The polycarbonate panes are subject to natural aging and therefore must be

subjected to regular visual inspection. Through contact with cooling lubricant, the

aging process is accelerated even further

If the window pane is damaged, it must be replaced. This is

necessary regardless of the extent of damage. Even with minimal

damage, the impact resistance of the pane can no longer be

guaranteed.

Heavily soiled or damaged wipers may cause damage to the inner pane. Moreover,

it may be possible that the work area door can be moved only with considerable

effort due to heavy soiling or chip deposits in the wipers.

Check the guide rails of the work area door. The guide bars must be checked and

cleaned regularly so that the work area door can be moved without much effort.

Procedure

1. Check window pane for damage.

Clean the outer pane with a soft cloth or sponge and glass

cleaner or soap and water. Do not use abrasive or alkaline

cleaners (e.g., benzene, acetone or carbon tetrachloride) and no

sharp tools or sharp objects (such as razor blades or

screwdrivers).

Clean outer pane.

3. Clean inner pane.

4. Check wipers. Remove and clean the wipers. If the wipers are severely

deformed or damaged, they must be replaced. To clean the door panels evenly,

be sure to reinstall the wipers after their removal aligned in parallel and ensure

that they snugly contact the work area door.

Maintenance Summary - Care activities

Maintenance Instructions

ABC.2

DIE244EN - 15.08.2022

Содержание ABC 2 Series























































































































Результаты поиска

Содержание ABC 2 Series

Отзывы:

Похожие инструкции для ABC 2 Series

Бренды по названию

Популярные бренды

Index ABC 2 Series, Руководство по эксплуатации

Результаты поиска

Содержание ABC 2 Series

Отзывы:

Похожие инструкции для ABC 2 Series

Бренды по названию

Популярные бренды