Page 29
VaxArray® Imaging and Analysis System Operation Manual
CF-0159 R004
Changing Administrator Privileges
1.
Log-in to the computer with an Administrator account
2.
Select the Windows Start icon
3.
Select Control Panel
4.
Select the link Add or remove user accounts under the User Accounts header
5.
Select the user that requires a change
6.
Select Change the Account Type
7.
Select the appropriate radio button to change the user account type
Permissions
By default there are two users created on the VaxArray System:
Username
Password
Admin
58gs31tw
ArrayReader (VaxArray)
02fe79bc
Each of the groups in the following list permits the users to perform a single action or group of related
actions. Members in any single group are not explicitly permitted to perform any of the actions in another
group. In other words, the listed groups are not inclusive where a “higher level” group i
ncludes actions
permitted by a “lower level” group. For example, a member of
VaxArrayRunExperiment is allowed to
perform imaging, but is not permitted to enter experimental variables unless also added to
VaxArraySetupExperiment group. To perform all functions of the software, a user would need to be added
to all groups.
Note:
Windows security groups and users are organized in a hierarchical manner. In order to make
administration of VaxArray permissions easier, you can alternatively create your own groups that batch
several types of VaxArray groups together. For instance, you could create a group called VaxArrayUsers, and
add to it the groups VaxArrayOperators, VaxArraySetupExperiment and VaxArrayRunExperiment. Then any
users added to VaxArrayUsers would be allowed to run the software, create experiments and run them.
Groups
Group:
VaxArrayOperators
Description:
These users are allowed to open the software.
Group:
VaxArraySetupExperiment
Description:
These users are allowed to create an experiment and setup initial values in the
Experiment Setup View. They are not explicitly allowed to perform scans and obtain results for the
experiment.
Group:
VaxArrayRunExperiment
Description:
These users are allowed to open an already created experiment and perform imaging
(and obtain results). They are not explicitly allowed to create a new experiment.
Group:
VaxArrayModifyExperiment
