inDESIGN iDR-111, Руководство по установке и эксплуатации

Страница: 18 / 24

iDR-111 / iDR-222 / iDT-HM1 / iDT-BP1: INSTALLATION & OPERATION MANUAL PAGE 18
SPECIFICATIONS
Wireless System General
Modulation Wideband FM
Frequency Ranges 530MHz-580MHz, 640MHz-690MHz
Frequency Group 8 preset groups
Frequency Response 80-18KHz(+1dB,-3dB)
Bandwidth 50MHz
Oscillation Mode PLL synthesised
T.H.D. ≤1%(1KHz/deviation ± 24KHz)
RF Stability ±15ppm
S/N Ratio ≥110dB(A)
iDR-111 / iDR-222 Receiver
Receiving Mode Antenna diversity
Antenna Input TNC X 2, bias 12V DC,100mA
Power Supply DC 12V
AF Output Max.(MIC) XLR, balanced: 0dBu; 6.3mm, unbalanced: -6dBu
AF Output Min.(Line) XLR, balanced: 12dBu; 6.3mm,unbalanced: 6dBu
Sensitivity <2.5uV(S/N =52dBr)
SQ Range 25dB
Squelch CPU/ID +RF+ Noise
Adjustable Volume -24dB - +18dB/in step of 1dB
IDT-HM1 Transmitter
Transmitting Mode CPU+Pilot
Nominal/Peak Deviation ±24KHz/±48KHz
Max Input Sound Pressure -10dBu(deviation±48KHz)
Power Supply 2 x 1.5V AA alkaline
Transmit Power 10mW/High 3mW/Low
Current Consumption 180mA/High,155mA/Low(±5mA)
Battery Life 8 hours High RF mode. 10 Hours Low RF mode
Display LCD
Microphone Capsule Cardioid dynamic moving coil
iDT-BP1 Transmitter
Transmitting Mode CPU+Pilot
Nominal/Peak Deviation ±24KHz/±48KHz
Max Input Sound Pressure -10dBu(deviation±48KHz)
Power Supply 1.5V AA X 2
Transmit Power 10mW/High 3mW/Low
Current Consumption 180mA/High,155mA/Low(±5mA)
Battery Life 8 hours High RF mode, 10 Hours Low RF mode
Input Connection TA4 (M)
Display TFT
Included Lapel Microphone Black electret condenser, Omni polar pattern
* Disclaimer: Instructions and specifications are correct at time of printing.
Information within may be subject to change without notice.