inDESIGN iDR-111, Руководство по установке и эксплуатации

Страница: 15 / 24

iDR-111 / iDR-222 / iDT-HM1 / iDT-BP1: INSTALLATION & OPERATION MANUAL PAGE 15
iDT-HM1 FUNCTIONS MENU OPERATION
Press the SET button once to enter functions menu.
Function menu settings are changed by pressing the UP and DOWN buttons. To scroll to the next function,
press the SET button once.
To Confirm an adjusted setting and exit the functions menu press the SET button.
Function – Microphone Capsule sensitivity. (-6dB / +6dB)
This function allows users to adjust the level sensitivity of the microphone capsule. For best operation adjust
the capsule sensitivity using the UP or DOWN buttons to achieve the highest audio output before distortion.
Function - Transmitter RF output signal adjustment
This function allows the user to choose between High (10mW) and Low (3mW) RF transmitter signal strength.
Use the UP and DOWN buttons to select High or Low.
For distances of 20-40 metres between the transmitter and receiver, it is recommended to set the
transmission strength to High (10mW).
Set the RF transmission strength to Low (3mW) if operating distance between the transmitter and receiver is
under 20 metres. If users experience RF interruptions or audio dropouts change the transmission setting
to High.
Battery life of the transmitter is dependent on the transmitter High and Low settings. On High users can
expect approx. 8 hours of operation. With the transmitter set on Low users can expect approx. 10 hours
of operation.
Function - Lock
The lock functions prevents users from adjusting any microphone settings including the MUTE function
except for the power ON/OFF button.
To lock the transmitter, press the SET button until the lock symbol flashes. Use the UP button to change the
symbol to locked. Press the set button again to confirm and exit the functions menu.
To unlock the transmitter, press the SET then DOWN Button and the unlock symbol will appear. Press the SET
button again to confirm and exit the functions menu.