Independence paragliding Trigon, Руководство пользователя

Страница: 6 / 16

16.
The parachute structure is square and has 12/16/20/24 panels (see “technical datas”)
The canopy is made of tear restistant, high strenght nylon fabric. The main seams are flat fell seams and are reinforced by
a band. The lines are sewn to the canopy and reinforced with V-tapes at the canopy. The crown is pulled down by the
center lines. All lines and center lines are connected to the bridle.
The bridle has a strength of more than 2400 daN.
Structure of the parachute
The deployment bag is made of nylon fabric and gets closed at 5 points.
On the deployment bag are two loops. At one of these loops the release handle of the outercontainer or the harness is
attached.
The outer container (option) is made of robust, water repellent Nylon fabric. It consists of 2 lateral flaps, the upper and
lower flap, the release handle with 2 pins, which closes the container.
back side outer container
with attachment points
outer container opened
velcro for harness
attachment
release handle
loop in points
release handle
upper side:
lower side:
Risers / bridles
Control handles
Trailing edge
Canopy
Suspension lines
riser front
riser rear
mounting points
marking
right/left
marking
front
control handles
pre-brake
steering lines
riser
upper part
suspension lines
inner
flap
Nose
12. Repairs
Repair jobs have to be done only by the manufacturer or a workshop which is certified by the manufacturer.
13. Nature and environment friendly behaviour
Please do our nature-near sport in a way which do not stress nature and environment!
Please do not walk beside the marked ways, don´t leave your litter, don´t make unnecessary loud noises and respect the
sensitive balance in the mountains. Especially at the take-off we have to take care for the nature!
14. Environmentally compatible waste disposal
The materials of which a rescue parchute is made require a special waste disposal. So please send disused parachutes
back to us. We will care about a professional waste disposal.
15. Spare parts / changeable parts
Beside the rubber rings the Ultra Cross series do not need any other spare parts. Only certified rubber rings with the size
25x3x1mm are allowed! This special rubber rings you can get from us very well priced.
This parachute system has been tested and found compliant using the original manufacturer's inner container. Use of any
other deployment bag may produce different results, including failures!
The deployment bag is part of the rescue parachute. It´s not allowed to use an other rescue parachute deployment bag of
other manufacturers, except a deployment bag described in 19.4. is used. A change to any other deployment bag will void
the airworthyness of the rescue parachute!
Overview:
construction of riser:
6 7