18. Mounting in a container
1. Connect the release handle at the loop in the middle of
the deployment bag. Place the bridle at the side of the
container which you prefer.
2. Close the two lateral flaps of the outercontainer with two
packing-cords and closed it with the pins of the handle
provisionally.
3. Close the upper and lower flap with the pins. Remove the
packing cords then!
4. Close the upper flap finally. Notice the packing in the
“repack and inspection log book”.
31. Place „8-shaped“ hanks on the deployment bag.
32. Close the last, outer flap with the suspension lines.
25. Fold right side S-shaped. (Step 1).
26. Fold left side S-shaped (Step 2).
27. Remove packing cord and place deployment bag under
the canopy.
28. Fold the rest of the canopy in S-folds in the deployment
bag.
29. Close inner flaps of deployment bag with suspension
lines.
30. Bundle the lines in “8-shaped” hanks. Do not bundle
the last 30 cm of lines.
Attention: Use new rubber rings for hanks and
deployment bag everytime the parachute is packed.
Schematic
illustration
S-fold
13
12
12
Содержание Trigon
Страница 16: ......