Inciner8 Limited. Company Registered in England & Wales - REG: 04866401
VAT Registration: 855999544
Enter the world of:
www.inciner8.com
+44 (0) 1704 884020
Leading Provider of Thermal Treatment Solutions
Assembly
STEP 2 - Connecting the Burners
a). In the primary burner box take out the
4 studs
and insert in the 4 holes in the primary burner mount.
b). Repeat the above process for the secondary burner.
c). Remover the mounting plate and gasket from the burner and attach to the studs using the
4 nuts
in the burner box.
d). Repeat the above process for the secondary burner.
e). With the burner mount attached the burner can be slotted back on the mount and tighten the retainer nut.
f). Repeat the above process for the secondary burner.
g). On both burner pumps remove the bolt
labelled P
and insert the pressure gauges supplied in the burner boxes using
sealant tape which is not supplied.
h). Connect the fuel pipes to both primary and secondary burner following the piping diagram found in the manual.
