inbody S10 Скачать руководство пользователя страница 63

Страница: 63 / 68

D. Classification

Body Composition Analyzer of Direct Segmental Multi-frequency Bioelectrical Impedance Analysis Method

•

Type of protection against electric shock: Class I

•

Type of the applied parts: BF Type

•

Degree of protection against water infiltration: IPX0

•

EMC Immunity: Level A

•

EMC Emission: Level A

•

Equipment is not suitable for use in the presence of flammable mixtures.

E. Specifications

Bioelectrical

Impedance Analysis (BIA)

Measurement Items

Bioelectrical

Impedance (Z)

30 Impedance Measurements by Using 6 Different Frequencies

(1kHz, 5kHz, 50kHz, 250kHz, 500kHz, 1000kHz) at Each of

5 Segments (Right Arm, Left Arm, Trunk, Right Leg and Left Leg)

Reactance (Xc)

15 Impedance Measurements by Using 3 Different Frequencies

(5kHz, 50kHz, 250kHz,) at Each of 5 Segments (Right Arm, Left Arm,

Trunk, Right Leg, and Left Leg)

Electrode Method

Touch Type / Adhesive Electrode System

Measurement Method

Direct Segmental Multi-frequency Bioelectrical Impedance Analysis Method,

DSM-BIA method

Body Composition

Calculation Method

No use of Empirical Estimation

Outputs

(Body Water Results Sheet)

Intercellular Water, Extracellular Water, Total Body Water, ECW/TBW, Segmental

Body Water Analysis (Right Arm, Left Arm, Trunk, Right Leg, Left Leg), Segmental

ECW/TBW Analysis (Right Arm, Left Arm, Trunk, Right Leg, Left Leg), Body Water

Composition History (Weight, Total Body Water, Intracellular Water, Extracellular Water,

ECW/TBW), Segmental ICW Analysis (Right Arm, Left Arm, Trunk, Right Leg, Left

Leg), Segmental ECW Analysis (Right Arm, Left Arm, Trunk, Right Leg, Left Leg),

Dry Lean Mass, Lean Body Mass, Body Fat Mass, Weight, Skeletal Muscle Mass, Body

Mass Index, Percent Body Fat, Basal Metabolic Rate, Visceral Fat Level, Reactance

(5kHz,50kHz, 250kHz), Whole Body Phase Angle (50kHz, Right side of the body),

Segmental Phase Angle (50kHz, Right Arm, Left Arm, Trunk, Right Leg, Left Leg),

Impedance at each segment/frequency

Outputs

(Body Composition

Results Sheet)

Intercellular Water, Extracellular Water, Total Body Water, Dry Lean Mass, Lean Body

Mass, Body Fat Mass, Weight, Skeletal Muscle Mass, Body Mass Index, Percent Body

Fat, Segmental Lean Analysis (Right Arm, Left Arm, Trunk, Right Leg, Left Leg),

Segmental ECW/TBW Analysis (Right Arm, Left Arm, Trunk, Right Leg, Left Leg),

ECW/TBW, Body Composition History (Weight, Skeletal Muscle Mass, Percent Body

Fat, ECW/TBW), Visceral Fat Area, Body Fat-Lean Body Mass Control, Segmental Fat

Analysis (Right Arm, Left Arm, Trunk,Right Leg, Left Leg), Basal Metabolic Rate, Leg

Lean Mass, TBW/LBM, Reactance (5kHz,50kHz, 250kHz), Whole Body Phase Angle

(50kHz, Right side of the body), Segmental Phase Angle (5kHz, 50kHz, 250kHz, Right

Arm, Left Arm, Trunk, Right Leg, Left Leg)

Impedance at each segment/frequency

Logo Display

Possible to input name of the user’s place, address and contact number

Results Sheet

Body Water Results Sheet, Body Composition Results Sheet

Portability

Indoors - with own cart, Outdoors - with own carrying case.

S10_manual_ENG_G_220317.indd 63

2022. 3. 23. 오후 4:57

Содержание S10




































































Результаты поиска

Содержание S10

Отзывы:

Похожие инструкции для S10

Бренды по названию

Популярные бренды

inbody S10, Руководство пользователя

Результаты поиска

Содержание S10

Отзывы:

Похожие инструкции для S10

Бренды по названию

Популярные бренды