inbody BSM270, Руководство пользователя

Страница: 19 / 64

19
II. Measurement
A. Precautions before measurement
B. Measurement method
To change the measurement mode setting, refer to 'I. Installation, D. Settings, 2. Set Up, 1)
and 6) .
1. Measure weight and height at the same time, and check BMI
When the subject is on the base, the weight appears on the display screen. Once the weight value
is stable, the signal sounds and the unit completes the weight measurement. Then, the height is measured.
If it is set to ‘
(automatic measurement)’ in the preferences, the height is automatically measured.
If it is set to ‘ (manual measurement)’, press the ‘Enter’ button to start the height measurement.
2. Measure weight only
When the subject is on the base, the weight appears on the display screen. Once the weight value
is stable, the signal sounds and the unit completes the weight measurements.
DANGER NOTE CAUTION
참 조 주 의
참 고 주 의
CAUTION
˙
Be careful not to get your fingers caught between the measuring part and the stand.
˙
Children or people with reduced mobility can be tested with the help of a manager or assistant.
˙
If the equipment shakes, use the leveling screw to keep it level.
<When Bluetooth communication is
not in use>
<When Bluetooth communication is
in use>
<When Bluetooth communication is
not in use>
<When Bluetooth communication is
in use>
DANGER NOTE CAUTION
참 조 주 의
참 고 주 의
ATTENTION
˙
Attention à ne pas coincer vos doigts entre le dispositif de mesure et le support.
˙
Les enfants et les personnes à mobilité réduite peuvent utiliser l'appareil seulement avec l’aide d’un
responsable ou d’un assistant.
˙
Si l’appareil semble instable, veuillez utiliser la vis d'ajustement à cet effet pour le garder de niveau.
여기에 텍스트 입력