background image

28

If the "LO" setting for the shower spray is still too strong, adjust the spray strength using the 
following procedure.

Making the spray strength still milder

•  Press the BIDET button and the POWER SAVE 

ON/OFF button simultaneously for 2 seconds or 

longer. 

The power lamp on the body blinks momentarily 

and the spray strength will weaken one step. 

There are two weak settings. Adjust the spray to 

your preferred strength.

* In places with low tap water pressure, the nozzles 

may not extend or it takes time longer than usual 

for the nozzle to extend, if the spray strength is 

set to the lowest.

The spray strength weakens one step 

each time the buttons are pressed. 

The original spray strength will be 

restored on the third time.

To make the spray strength weaker, press the 

buttons simultaneously for 2 seconds or longer.

•  To restore the original spray strength, repeat the process of pressing the BIDET button and the 

POWER SAVE ON/OFF button simultaneously for 2 seconds or longer. The original spray strength 

will be restored on the third time.

* Operate the buttons twice when weakened one step; once when weakened two steps. 

The power lamp on the body blinks momentarily each time the buttons are pressed. 

Persons who think the "strong" setting for the shower spray is still too weak can adjust the spray 
strength using the following procedure. 
The “strong” setting can be further strengthened. 

For persons who would like to make the spray strength much stronger

•  Press the SHOWER button and the POWER SAVE 

ON/OFF button simultaneously for 2 seconds or 

longer. 

The power lamp on the body blinks momentarily 

and the spray strength will be strengthened one 

step.

•  To restore the original spray strength, press the SHOWER button and the POWER SAVE ON/OFF 

button simultaneously for 2 seconds or longer. 

The power lamp on the body blinks momentarily each time the buttons are pressed. 

Press the buttons simultaneously for 2 seconds or longer.

 

Setting and canceling

 Setting and canceling

GCW-1220-W-08110.indd   28

GCW-1220-W-08110.indd   28

2011/07/12   11:12:28

2011/07/12   11:12:28

Содержание CW-RS3-W













































Отзывы: