background image

17

(1) Turn the water shutoff valve to the right to close it. 

As the water shutoff valve is pre-adjusted, remember the 
original position (how much it is turned). 

(2) Remove the strainer on the left side of the body. 

Place a wash bowl or similar underneath the strainer. 

(3) Clean the strainer. 

(4) Firmly tighten the strainer. 

(5) Turn the water shutoff valve to the original position to open it.

(1) Turn the water shutoff valve to the right to stop water supply to 

the tank. 
(For cold area drain type, operate the indoor drain plug.)

(2) Press the flush lever on the tank to drain water from the tank. 
(3) Remove the power plug from the outlet. 
(4) Drain water from the hot water tank and the water supply hose 

connected to the body.

1)  Pull the lock lever on the right side of the body and slide the 

body forward to remove it from the toilet bowl. 

2) Remove the strainer on the left side of the body. Place a wash 

bowl or similar underneath the strainer. 

3) Tilt the body to the left to drain water from the water supply 

hose through the strainer hole. 

4) After water drainage, firmly attach the strainer.  
5) Turn the drain plug on the bottom of the body to the left 

(counterclockwise) 90 degrees to loosen it. 

6) Tilt the body forward, pull out the drain plug and drain water 

from the hot water tank completely. 

7) After water drainage, push and turn the drain plug to the right 

(clockwise) 90 degrees to tighten it. 

8) Place the body on the toilet bowl, and engage the 

 mark on 

the mounting plate with the convex part at the lower rear of the 
body. 

9) Slide the body backward and push the lock lever to secure the 

body. 

Strainer

Water Shutoff 
Valve

Turn 
clockwise.

Turn 
clockwise.

Strainer

Lock Lever

Drain Plug

Loosen

mark of the Fixing Plate

Convex part of the 
back of the body

3. If flushing begins to weaken,or if the shower spray 

seems to be getting weaker, clean the strainers.

4. If freezing weather is anticipated before handing the 

product to the customer, drain the water.

GCW-1220-W-08110.indd   17

GCW-1220-W-08110.indd   17

2011/07/12   11:12:21

2011/07/12   11:12:21

Содержание CW-RS3-W













































Отзывы: