•
If a message is displayed stating that not enough
power is available for the connected device:
Make sure the 15-pin SATA cable is connected to the
card (either by the 4-pin molex adapter or direct 15-pin
SATA). Alternatively, if the device has its own external
power source, make sure it is plugged in.
10
• If there is a yellow exclamation point on the controller
in the Device Manager:
1. Please shut down your computer and move the
card to another available PCIe slot, then re-install
the USB 3.0 driver.
2. In the device manager, select the Fresco Logic Xhci
(USB 3) Root hub, right-click using your mouse,
and select “Update Driver” to update the USB
driver.
3. This exclamation point usually means there is a
resource conflict between this card and another
card in your system. Please move the card to
another available slot and then restart your
computer. Windows will re-configure itself and
re-assign resources. Check the device manager
again to insure the issue has been resolved.