EN
33
The airbag vest can be worn under a jacket. To make sure
your jacket is compatible with the airbag vest,
measurements
must be taken
. You can check the compatibility of your
jacket yourself by following the protocol below:
EQUIPMENT COMPATIBILITY
#1
MEASURE THE USER WITHOUT THE
VEST
The following measurement is to be
taken without wearing the vest:
A) Measure your chest circumference in
cm (e.g.: A = 100 cm).
#2
MEASURE THE JACKET
The following measurements are
made by stretching the jacket tightly.
All elastic fabrics and elasticated
parts must be well stretched in the
measurement direction.
Place your closed jacket on a flat
surface.
B) Stretching the jacket until the elastic and fabric parts are
tight, measure the width of the jacket under the armpits in
cm (e.g.: B = 58 cm).
C) Multiply the value obtained in B by 2 (e.g.: C = 2x58cm =
116cm).
#3
COMPATIBILITY
Your jacket is compatible with the airbag vest if the difference
between the value obtained in C (e.g.: C = 116cm) and the
measurement obtained at A (e.g: A = 100cm) is
greater than
or equal to 13cm
.
If in doubt, ask your local dealer for advice.
Example: 116-100=16 cm Your jacket is compatible.
