USER MANUAL
PAGE 08
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
It’s important to carefully read the following installation instructions before beginning the installation of your oven.
IMPORTANT!
The connection of this oven must be carried out by a suitably qualified and licensed person, in
accordance with the current versions of the following:
► AS/NZS 3000 Wiring Rules
► Electricity Safety Regulations 2010
► The installation instructions within this user manual
Note:
Ensure there is a grounded socket nearby (behind the unit). A dedicated power circuit is recommended for the unit
but not required. Additional electrical appliances on the same circuit may exceed the current (amperage) rating for that
circuit. If after the installation of your unit the circuit breaker trips or the fuse fails on a repeated basis then a dedicated
circuit will likely be required.
POSITIONING
The adjacent cabinetry and wall materials must be able to withstand a minimum temperature rise of 85°C above the
ambient temperature of the room.
► The kitchen area should be dry and equipped with sufficient ventilation. When installing the oven, easy access to all
control elements should be ensured.
► This is a built-in oven and has been designed to be housed within an oven cabinet. Coating or veneer used on cabinetry
must be applied with a heat resistant adhesive (rated to 120°c). This prevents surface deformation or detachment of the
coating. In the case of vinyl wrap kitchens, it is strongly recommended to have heat deflectors installed on either side
of the oven cabinet.
► Your oven cabinet should be made to suit the following dimensions and can be either a tall or underbench cabinet to
suit your kitchen design.
► Make sure that the electrical circuit is disconnected or fuse removed, then connect the oven into the mains supply.
Important! As this appliance is hard-wired, the installation/connection should only be completed by a licensed
electrician.
► Insert the oven completely into the oven cabinet and use the four screws supplied to fix the oven into place (refer to
the diagram below).
