6
Caution
●
Do not spill water and/or other liquids on the remote control.
●
Do not handle the remote control with wet hands.
●
Do not sit on the remote control. Do not drop or step on the remote control. Do not pull the remote control cord forcibly.
●
Do not use pointed or hard objects to push the buttons.
→
May result in damage to the remote control.
Remote Control
Remote Control/Inside the Panel
Program Selection Display
When a program is selected
inside the remote control
panel, the corresponding light
turns on.
Roller Position Display
The position of the roller
during the massage is
displayed.
Shiatsu Point Locator
Indicator
A light indicates when the
shiatsu point locator is
operating and when the
operation has finished.
POWER Button
Turns the remote control power ON and
OFF.
If the button is pressed again, the
operation will stop after the rollers return
to their storage position.
The button is lit in green while the power
to the remote control is ON, in orange
while the power is OFF, and in red while the
chair is stopped in an emergency.
EMERGENCY STOP Button
Use this button to shut the chair off
immediately in an emergency or if there
is a malfunction during operation of the
chair.
The rollers will stop immediately.
Preset Program Buttons
(Healthcare Programs)
→
See P17
ROLLER-Position Adjustment Buttons
→
See P20
RECLINE Buttons
→
See P13
LEG REST Buttons
→
See P14
Use to adjust the angle of the
leg rest.
Use to adjust the angle of the
reclining seat back.
Use to adjust the shoulder position while
the shiatsu point locator is operating, and
to adjust the roller position during manual
selection mode.
Selects the program with the
corresponding name.
Basic Operation Buttons
→
See P23
Selects among basic massage
operations such as Kneading, Tapping,
or Rolling.
Air Massage Buttons
→
See P23
Selects among Shoulder, Arm or Low
Body air massage.
* These 3 air massage types can all be selected
at the same time. Press the buttons repeatedly
to adjust the air intensity.
Preset Program Buttons
(Quick Programs)
→
See P18
Selects the program with the
corresponding name.
Preset Program Buttons
(Wellbeing Programs)
→
See P18
Selects the program with the
corresponding name.
Intensity Buttons
→
See P24
Adjusts the basic operations.
[C
O
M
PO
N
EN
TS
&
D
ES
CR
IP
TIO
N
]
