800-446-7488
24
www.in-situ.com
1. Open Win-Situ 5 Plus Software.
2. Click
No
when prompted
Connect to device now?
3. Click
Preferences
.
4. Click
Comm Settings...
5. Click the radio button next to
Modem Communications
.
6. Enter the data phone number.
7. Enter the
Device Address
of the instrument you intend to connect to (Default 1).
8. Enter the number of
Retries
(user-defined; 3 is recommended).
9. Enter a
Transmission Delay
value between 15 and 20.
10. Enter the TROLL Link password, if applicable.
11. Ensure the
Mode
is set to
Modbus-ASCII
.
12. Click the
check mark
.
13. Click the connect button in the lower-right corner.
14. Click the
Logging
tab, click the desired log and click
Download
.
15. Click the disconnect button.
Connecting to the TROLL Link 100 in TCP/IP Mode
Win-Situ 5 Plus can only establish a connection to the TROLL Link Telemetry
System during a scheduled Wake/Message period.
1. Open Win-Situ 5 Plus Software.
2. Click
No
when prompted
Connect to device now?
3. Click
Preferences
.
4. Click
Comm Settings...
5. Click the radio button next to
IP Communications
.
6. Enter the IP Address and Port Number.
The IP Address and Port Number are available (if you wrote them
down when prompted) in the section
. You must reconnect to the TROLL Link Telemetry
System using the TROLL Link Setup Software and find the
numbers on the Summary Tab if you did not write the numbers
down.
7. Enter the
Device Address
of the instrument to connect to (Default 1).
8. Enter the number of
Retries
(user-defined; 3 is recommended).
9. Enter a
Transmission Delay
value between 15 and 20.
Содержание TROLL 101
Страница 48: ...800 446 7488 48 www in situ com ...
