800-446-7488
15
www.in-situ.com
Wiring Diagram
Connecting the Cube to the Computer
1. Connect the setup cable to the communication port of the Cube and to the computer.
2. Download the ANT Tube Tool software from
www.in-situ.com/support
3. Install and open the ANT Tube Tool software.
4. Select the correct serial port. A serial-to-serial adapter is typically COM1. A USB-to-serial adapter is typically a different COM
number.
Input Configuration
1. Click
General information, parameters, and options
.
2. Click the
Options
tab.
l
For a
digital or pulse input
: enter a Parameter name, value of a parameter, and parameter units under
Input 1
.
l
For an
analog input
: enter a Parameter name, high and low values, and parameter units under
Input 2
.
The Power supply to the probes checkbox must be checked for analog input devices.
For HydroVu users, the Parameter name and units are directly passed to the cloud. They cannot be changed
from HydroVu.
3. Click
Write options and parameters
.
4. Close the window. Click
Probe and set-point configuration
.
5. From an open probe drop down menu, select Digital in, Pulse in, or Analog in.
6. Click
Write Probe and set-points
.
