800-446-7488
12
www.in-situ.com
Configure Options
1. Click
General information, parameters and functional options
.
2. Click the
Options
tab.
3. "Barometric compensation for level readings" is only changeable if you have a Cube with an internal barometric sensor. Enter a
manual value for the density of water if needed.
4. Select "Power supply to the probes" if you are deploying an Aqua TROLL 400, RDO PRO-X probe, or Rugged TROLL 200.
5. Select whether to send data to an email address or to an FTP site.
Do not alter the settings in the data file settings.
6. Click the
Write options and parameters
button.
7. Close the window.
Modem Parameters
1. Click
General information, parameters and functional options
.
2. Click the
Communication (1)
tab.
3. Enter the Access point name (APN) in the field under "Access Point". If you purchased a SIM card and data plan through In-Situ,
your access point name is:
For KORE SIM cards:
c2.korem2m.com (U.S.A.)
vfd1.korem2m.com (outside U.S.A.)
For EMnify SIM cards:
em
If you are using a third-party cellular service provider, you must contact them for your APN.
4. If your cellular service provider requires a user name and password, enter those in the fields under the access point name. In-
Situ USA SIM cards do not require a user name or password. In-Situ International SIM cards require a user name and password:
Username:
KORE
Password:
1234
5. Enter up to 2 phone numbers in the fields under "SMS" to receive Cube status updates and alerts via text messages.
6. If you are using FTP to receive data, fill in all the fields of the FTP parameters section. "CSV" and "TXT" are the only options for file
type.
FTP site must support ASCII and PASV data transfer modes.
The FTP filename MUST be unique if you are setting up multiple telemetry units. In-Situ recommends using the
telemetry unit serial number for each unit set up.
7. To receive data or alerts using email, click the
Communication (2) tab
. Enter the SMTP server for your email or internet service
provider. If your provider requires a user name and password, enter those in the fields under the SMTP server. In-Situ
SIM
cards do not provide an SMTP server
.
