IMS MicroLYNX Скачать руководство пользователя страница 26

Страница: 26 / 98

Using The Isolated Digital I/O

T h e I s o l a t e d D i g i t a l I / O D e f i n e d

The MicroLYNX comes standard with a set of

six (6) +5 to +24VDC I/O lines which may

be programmed individually as either

general purpose or dedicated inputs

or outputs, or collectively as a

group. The isolated digital I/O
may also be expanded to twenty-

four (24) lines in groups of six (6).

The I/O groups and lines are

numbered in the following fashion:

Group 20 = Lines 21 - 26 (Standard)

Group 30 = Lines 31 - 36 (Optional)

Group 40 = Lines 41 - 46 (Optional)

Group 50 = Lines 51 - 56 (Optional)

The isolated digital I/O may be defined as either active HIGH or
active LOW. When the I/O is configured as active HIGH, the

level is +5 to +24VDC and the state will be read as a “1”. If the
level is 0 VDC, then the state will be read as “0”. Inversely, if

configured as active LOW, then the state of the I/O will be read as
a “1” when the level is LOW, and a “0” when the level is HIGH.

The active HIGH/LOW state is configured by the third parameter of the IOS
variable, which is explained further on. The goal of this I/O configuration
scheme is to maximize compatibility between the MicroLYNX and standard
sensors and switches.

T h e P i n C o n f i g u r a t i o n o f t h e I s o l a t e d I / O

The following figure illustrates the pinout of I/O group 20:

The

is the voltage

of the I/O, it is HIGH if it is

5 to 24 VDC, or LOW if it is 0 VDC. The

is read as a “1” or a “0” where “1” is

considered to be Active/ON and “0” is

considered to be Inactive/OFF as

determined by the LEVEL of the I/O

and how the I/O was defined to

respond to that Level

LEVEL

STATE

MICRO

GR
OUP 20 I/O

COMMUNICA

TIONS

EXP

ANSIONS BO

ARDS

I/O LINE 25

V PULLUP

I/O GROUND

I/O LINE 26

I/O LINE 24

I/O LINE 23

I/O LINE 22

I/O LINE 21

Figure 8.1: Isolated I/O Pin Configuration

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Содержание MicroLYNX



































































































Результаты поиска

Содержание MicroLYNX

Отзывы:

IMS MicroLYNX, Быстрое руководство, Страница: 26 / 98

Результаты поиска

Содержание MicroLYNX

Отзывы: