manualshive.com logo in svg

IMS 17, Руководство по эксплуатации

Поделиться
Скачать
IMS 17 Скачать руководство пользователя страница 32

30

F l a g s

Flags show the status of an event or condition.  A flag will only have one of two possible states: either 1 or 0. Unlike variables,
there are only factory defined flags.

F a c t o r y   D e f i n e d   F l a g s

Factory defined flags are predefined at the factory and cannot be deleted. When a FD (Factory Defaults) instruction is given, these
flags will be returned to their factory default state.  There are two types of factory defined flags:

.

Read/Writable: This type of flag is user alterable.  They are typically used to set a condition or mode of operation
for the MDrive Motion Control. For example: EE = 1 would enable encoder operation, or EE = 0 would disable the
encoder functions.

.

Read Only: Read Only flags cannot be modified by the user. They only give an indication of an event or condition.
Typically this type of flag would be used in a program in conjunction with the BR (Branch Instruction) to generate
an if/then event based upon a condition. For Example: the following line of code in a program  BR SP,  MV = 0
would cause a program to branch to a subroutine named “SP” when the MV, the read only moving flag, is false.

K e y w o r d s

Keywords are used in conjunction with the PR and IP instructions to indicate or control variables and flags.  For instance, PR UV
would print the state of all the user-defined variables to the screen. IP would restore all the factory variables from the EEPROM.

M o s t   C o m m o n l y   U s e d   V a r i a b l e s   a n d   C o m m a n d s

V a r i a b l e s

P

P indicates the position in either steps or encoder counts depending upon the enable/disable state of encoder functions.

.

P takes its reading from C1 (Counter 1) when encoder functions are disabled. The reading is taken from C2 (Counter 2) when
encoder functions are enabled.

.

To read the position, type 

PR P

 or 

PR C1/C2

 then hit enter

.

To zero the position, type 

P=0

  then hit enter

V I

Initial velocity in steps per second.

.

To read the initial velocity, type 

PR VI 

then hit enter

.

To write to the Initial velocity, type 

VI=500 

 then hit enter

V M

Maximum or final velocity in steps per second.

.

To read the final velocity, key-in 

PR VM

 then hit enter

.

To write to the final velocity, key-in 

VM=5000 

 then hit enter

A

Acceleration in steps per second

2

.

.

To read the acceleration, key-in 

PR A

 then hit enter

.

To write to the acceleration, key-in 

A=7500 

 then hit enter

D

Deceleration in steps per second

2

.

.

To read the deceleration, key-in 

PR D 

then hit enter

.

To write to the deceleration, key-in 

D=A

 then hit enter

Содержание 17






































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды